Knowledge Base - Connecting to the phone with a web browser (e.g., Chrome) [Yealink]

Enter the IP address in a web browser to connect to the built-in configuration editor in the phone.

The default username and password is 'user' and 'user'. If this default is used the phone may recommend you change the password. Please note that if you lose your password, you may be forced to factory reset your phone which will erase all custom settings.

Please avoid edits to the web interface without careful consideration. It is possible to make some changes which may disable your phone. Repairing an incorrect edit may require a reboot, or may require a factory reset.

Edits documented in our knowledge base such as DSS keys or Local Directory are considered safe.

Setting a custom password does improve your security however as without one, other users on your local network could access your phone's settings.

Applies To

Yealink SIP-T21P-E2, Yealink W52P / W52H, Yealink SIP-T48G, Yealink SIP-T29G, Yealink CP860 (EOL), Yealink CP920, Yealink CP960, Yealink W60P / W56H, Yealink CP930W, Yealink SIP-T43U, Yealink SIP-T46U, EXP43

Related Articles

Factory resetting a Yealink desk or conference phone

Determining the IP address on a Desk, Cordless, or Conference Phone [Yealink]

Factory resetting a Yealink W52P/W60P

Editing one touch dials (DSS or Line Keys) on Desk Phones [Yealink]